This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents MPG ARTYMIS 273CQR Monitor MAG ARTYMIS 274CP Quick Start Guide...
Installing the Monitor Stand 1. Leave the monitor in its protective foam packaging. Align the latches of the stand to the monitor. Tighten the stand with screws. 2. Connect the stand base to the stand and tighten the screw to secure the stand base.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. 100mm Getting Started...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the monitor power adapter & power cord. (Figure A) 4. Connect the power adapter to the monitor power jack. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: ∙...
OSD Menus ⚠ Important The following settings will be grayed out when HDR signals are received: Night Vision ∙ MPRT ∙ Low Blue Light ∙ HDCR ∙ Brightness ∙ Contrast ∙ Color Temperature ∙ Auto Brightness Control ∙ ∙ Ambient RGB Light OSD Menus...
G.I. (MPG ARTYMIS 273CQR) 1st Level Menu 2nd/3rd Level Menu Description Auto ∙ Through the internal Light Sensor Brightness and AI (Artificial Intelligence) Auto Control algorithm, this function detects the ambient light and Customize automatically sets the monitor to optimal brightness for users.
1st Level Menu 2nd/3rd Level Menu Description Smart None ∙ Through AI algorithm, this Crosshair function enhances the visibility of Icon in-game crosshair. ∙ Users can select the color and position of the crosshair. Color White Auto Position Reset Gaming 1st Level Menu 2nd/3rd Level Menu Description...
Page 14
1st Level Menu 2nd/3rd Level Menu Description MPRT ∙ When MPRT is enabled, Brightness cannot be enabled and will be grayed out. ∙ Response time will be grayed out while MPRT is enabled. ∙ MPRT is available when the refresh rate is over 85Hz.
1st Level Menu 2nd/3rd Level Menu Description Smart None ∙ Through AI algorithm, this function Crosshair enhances the visibility of in-game Icon crosshair. (MAG ARTYMIS 274CP) ∙ Users can select the color and position of the crosshair. Color White Auto Position Reset FreeSync...
1st Level Menu 2nd Level Menu Description HDCR ∙ HDCR enhances image quality by increasing the contrast of images. ∙ When HDCR is set to ON, Brightness will be grayed out. ∙ HDCR and MPRT cannot be enabled simultaneously. MPRT ∙...
1st Level Menu 2nd/3rd Level Menu Description Color Cool ∙ Use Up or Down Button to select Temperature and preview mode effects. Normal ∙ Press the Middle Button to confirm and apply your mode Warm type. Customization R (0-100) G (0-100) B (0-100) Screen Size Auto...
Navi Key 1st Level Menu 2nd Level Menu Description Up / Down / Left ∙ All Navi Key items can be adjusted via / Right OSD Menus. Brightness Game Mode Smart Crosshair Alarm Clock Input Source Refresh Rate Info. On Screen Night Vision Setting 1st Level Menu...
Page 19
1st Level Menu 2nd Level Menu Description Transparency ∙ Users can adjust Transparency in any mode. OSD Time Out 5~30s ∙ Users can adjust OSD Time Out in any mode. RGB LED ∙ Users can adjust RGB LED to ON or OFF. (MPG ARTYMIS 273CQR) Power Button...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 26
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 29
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.