MSI MPG ARTYMIS 273CQR User Manual page 19

1st Level Menu 2nd Level Menu
Transparency 0~5
OSD Time Out 5~30s
RGB LED OFF
(MPG ARTYMIS
ON
273CQR)
Power Button OFF
Standby
Info. On Screen OFF
ON
HDMI CEC OFF
ON
Reset YES
NO
Description
∙ Users can adjust Transparency in any
mode.
∙ Users can adjust OSD Time Out in any
mode.
∙ Users can adjust RGB LED to ON or OFF.
∙ When set to OFF, users can press the
power button to turn off the monitor.
∙ When set to Standby, users can press the
power button to turn off the panel and
backlight.
∙ The information of the monitor status will
be shown on the right side of the screen.
∙ HDMI CEC (Consumer Electronics Control)
supports Sony PlayStation®, Nintendo®
Switch™, Xbox Series X|S consoles and
various audio-visual devices that are CEC-
capable.
∙ If HDMI CEC is set to ON:
• The monitor will automatically power on
when the CEC device is turned on.
• The CEC device will enter power saving
mode when the monitor is turned off.
• When Sony PlayStation®, Nintendo®
Switch™, or Xbox Series X|S console is
connected, Game and Pro Mode will be
automatically set to User mode (Default)
and can be adjusted to users' preferred
modes later.
∙ Users can Reset and restore settings to
original OSD Default in any mode.
19
OSD Menus