Table of Contents
Advertisement
Connections & Setup
TV
FCC Statement: This digital television is capable of receiving analog basic, digital basic
and digital premium cable television programming by direct connection to a cable system
providing such programming. A security card provided by your cable operator is required
to view encrypted digital programming. Certain advanced and interactive digital cable
services such as video-on-demand, a cable operator's enhanced program guide and data-
enhanced television services may require the use of a set-top box. For more information,
call your local cable operator.
How to Connect: TV + CableCARD
The CableCARD slot allows you to use a digital cable television card to receive digital cable services, including premium and
HDTV cable channels, without the need for a set-top box. Please contact your local cable company for availability of services
and to obtain a digital cable television card.
When you receive the digital cable card, make sure you connect your coaxial cable to the CABLE INPUT jack. Then, turn on
your TV. Insert the digital cable card into the slot on the back of the TV labeled CableCARD. Push firmly on the card until
almost the entire card is inserted. Wait to receive information on-screen regarding your digital cable television services. See
below for information on setting up digital cable television services for your TV.
You should know:
•
Once the digital cable card is authorized for a particular TV, the card can't be used with any other TV, unless it is re-
authorized to it.
•
You won't receive digital cable channels if you connect your cable to the ANTENNA INPUT. Make sure you connect
your cable to the CABLE INPUT.
•
Once inserted, it is not recommended you remove the digital cable card. In the case it needs to be removed, grasp
firmly, and pull the card straight out.
Setting Up Digital Cable Television Service
Once you have connected a digital cable card to the CableCARD slot on the back of the TV (explained above), you are
ready to receive digital cable channels. Wait approximately 30 seconds for the status screen to appear. Write down the
information you see and call your cable company to provide them with the information on-screen.
Notes: If your information screen disappears before you have a chance to write down the information, press MENU
on the remote to access the menu system. Then press 9, 9, 9, and the information screen appears. Go to page 58 for
more information on the CableCARD Tools menu.
You can't order video-on-demand through your digital cable card. Call your local cable company to place an order.
18
FIXED/VARIABLE AUDIO OUTPUTS
CENTER SPEAKER INPUT
CENTER
L REAR
R REAR
MATRIX
EXTERNAL AMP
SURROUND
MAX POWER RATING!
OUTPUTS
(60 WATTS into 8 OHMS)
SUBWOOFER
R
WIRED
L
R
IR
POWER
(AC 120V~60Hz)
DIGITAL
AUDIO
CableCARD™
ETHERNET
OUTPUT
COMPONENT/COMPOSITE INPUTS
COMPOSITE INPUTS
INPUT 3
R
L
V
S-VIDEO
R
L
AUDIO/VIDEO
OUTPUT
L
V
R
V
S-VIDEO
R
L
L
INPUT 1
CABLE
INPUT
FACTORY USE ONLY
HDMI/DVI INPUT
Use menu for DVI audio.
Use menu for composite video.
INPUT 4
P
R
P
Y/VIDEO
B
P
P
Y/VIDEO
R
B
INPUT 2
ANTENNA INPUT
CABLE
Go to page 21
Chapter 1
Advertisement
Table of Contents
