The Front Of Your Tv; Front Input Jacks; Front Panel - RCA Scenium HD44LPW164 User Manual

Hdtv with dlp technology
Hide thumbs Also See for Scenium HD44LPW164:
Table of Contents

Advertisement

Connections & Setup

The Front of Your TV

Front Input Jacks

The TV has front input jacks for convenience in connecting a camcorder, digital camera, or video game system. Look for a
hinged door and press to open the cover. Please note the illustration below is just an example of how these jacks might
appear.
Notes: When you plug in headphones, the TV's internal speakers are muted. Use the VOL up or down button to
control the volume.
When connecting a component that uses a monaural cable, such as some camcorders, use the L/MONO input jack to
get sound from both speakers.
MENU/OK
CH

Front Panel

If you cannot locate your remote, you can use the front panel of your TV to operate many of the TV's features.
MENU/OK Brings up the Main menu. When the menu system is displayed, pressing MENU/OK selects highlighted items.
CH
Scans down through the channel list. In the menu system, it moves the highlight down and adjusts menu controls.
CH
Scans up through the current channel list. In the menu system, it moves the highlight up and adjusts menu controls.
VOL
Decreases the volume. In the menu system, it moves the highlight left to items and adjusts menu controls.
VOL
Increases the volume. In the menu system, it moves the highlight right to items and adjusts menu controls.
(Power button and indicator) Turns the TV on and off. The indicator lights when TV is on. Your HDTV's lamp has a
cool-down period when the TV is turned off, and a warm up period when the TV is turned on. If you try to turn the TV on
during a cool-down, you will hear audio and then the picture will be displayed after a few moments. This could take up to
one minute. For different light status of the indicator, see above.
14
AUDIO IN
VIDEO
S-VIDEO
L/MONO
R
IN
HEADPHONE
Power button
and indicator
VOL
CH
VOL
Notes: The front panel illustration shows a typical front panel layout. The
exact look may be different from the one on the front of your TV.
If you use the Front Button Block feature, the front panel no longer provides
access to the menus. The Front Button Block feature disables all front panel
buttons but not the jacks. For more information, see Chapter 3.
Power Indicator Light Status
On
IN
Off
Blinks
TV is on
TV is off (standby mode)
Light blinks 5 times, pauses, and blinks again 5 times:
Lamp is trying to turn on. If the TV doesn't turn on
after 5 minutes and then the light blinks steadily for
one minute, one of the following options is possible:
Lamp door is open. Locate the door on the side of
the TV and close it. Turn off the TV and turn back on.
The lamp should turn on.
Lamp is dead. You can replace the lamp yourself
following the instructions on page 67. Go to page 72
for ordering information.
Lamp power supply within TV may need service. Go
to page 73 for warranty information.
Chapter 1

Advertisement

Table of Contents
loading

Table of Contents