Volvo XC40 2020 Owner's Manual page 300

DRIVER SUPPORT
Selecting and activating adaptive
53
cruise control*
Adaptive cruise control (ACC
selected and then activated to enable it to
control speed and distance.
To start the function requires the following:
The driver's seatbelt must be buckled and
•
the driver's door must be closed.
There must be a vehicle (the "target vehi-
•
cle") within reasonable distance in front of
the car, or the current speed must be at
least 15 km/h (9 mph).
53 This function can be either standard or optional, depending on market.
54 Adaptive Cruise Control
298
For cars with manual gearbox. Speed
•
must be at the lowest 30 km/h (20 mph).
Press the steering wheel button ◀ (2) or ▶
54 1.
) must first be
(3) to scroll to the adaptive cruise control
symbol
> The symbol is grey – the adaptive
cruise control is in standby mode.
2. When speed limiter is selected – press the
steering wheel button
> The symbol is white – the speed limiter
is started and the current speed is
stored as maximum speed.
Reactivating adaptive cruise control to
the last stored speed
When the adaptive cruise control is
–
selected – press the steering wheel but-
ton
> The cruise control markings and sym-
bols in the driver display change colour
from GREY to WHITE — the car will
now follow the most recently stored
speed again.
WARNING
A significant increase in speed may follow
when the speed is resumed with the
steering wheel button.
(4).
(1) to activate.
to activate.
Related information
Adaptive cruise control* (p. 295)
•
Deactivating adaptive cruise control*
•
(p. 299)
Change between cruise control and adap-
•
tive cruise control* in the centre display
(p. 301)
Limitations for adaptive cruise control*
•
(p. 301)
* Option/accessory.