Volvo XC40 2020 Owner's Manual page 146

LIGHTING
Using direction indicators
The car's direction indicators are operated
with the left-hand stalk switch. The direction
indicator lamps flash three times or continu-
ously, depending on how far up or down the
stalk switch is moved.
Direction indicators.
Short flash sequence
Move the stalk switch up or down to the
first position and release. The direction
indicator lamps flash three times. If the
function is deactivated via the centre dis-
play, the lamps will flash once.
3 LED (Light Emitting Diode)
144
NOTE
This automatic flashing sequence can
•
be stopped by moving the stalk switch
immediately in the opposite direction.
If the symbol for direction indicators in
•
the driver display flashes more quickly
than normal - see the message in the
driver display.
Continuous flash sequence
Move the stalk switch up or down to its
end position.
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
Related information
Hazard warning flashers (p. 147)
•
Adjusting light functions via the centre
•
display (p. 139)
Replacing the rear direction indicator bulb
•
(p. 618)
Active bending lights*
Active bending lights are designed to provide
additional illumination in bends and junctions.
3
Cars with LED headlamps* can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
Active bending lights follow steering wheel
movements to provide additional illumination
in bends and junctions and can thereby pro-
vide the driver with improved visibility.
The function is activated automatically when
the car is started. In the event of a fault in the
function, the symbol illuminates in the
driver display at the same time as the driver
display shows an explanatory text.
* Option/accessory.