Table of Contents
Advertisement
DISPLAYS AND VOICE CONTROL
||
Cancel voice control
Voice control can be cancelled in different
ways:
Tap briefly on
and say "
•
Give a long press on the steering wheel
•
button for voice control
two beeps. This stops voice recognition
even when the system is speaking.
Voice control is also cancelled if you do not
reply during a dialogue. The system will first
ask for a reply three times and if there is still
no response then voice control will be cancel-
led automatically.
To speed up communication and skip the
prompts from the system, press the steering
wheel button for voice control
cels the system voice and you can say the next
command.
Example of voice recognition control
Press
.
1.
18
Note that this only stops the dialogue when the system is not speaking. To do that, give a long press on
132
2. Say "
Call [Forename] [Surname]
[number category]
Smith Mobile
> The system dials the selected contact
Cancel
".
from the phonebook. If the contact has
several phone numbers (e.g. home,
until you hear
mobile, work), the right category must
be referred to.
Commands/phrases
The following commands can generally be
used, regardless of the situation:
"
Repeat
•
tion in the ongoing dialogue.
"
Cancel
•
"
Help
" - starts a help dialogue. The sys-
•
. This can-
tem replies with the commands available
in the current situation, a prompt or an
example.
Commands for specific functions such as
phone and radio are described in specific sec-
tions.
Digits
The number commands are stated differently
depending on the function to be controlled:
Phone numbers and postcodes must be
•
spoken individually, number by number,
Call Robin
", e.g. "
".
" - repeats the last voice instruc-
18
" - discontinue the dialogue.
until two beep tones are heard.
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
House numbers can be spoken individu-
•
ally or in groups, e.g. "two, two" or
"twenty-two" (22). For English and Dutch,
several groups can be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple can be used,
e.g. "double zero" (00). Numbers can be
given within the range 0-2300.
Frequencies can be spoken as "ninety
•
eight point eight" (98.8), "a hundred and
four point two" or "hundred four point
two" (104.2).
Speed and repetition mode
It is possible to adjust the speed if the system
is speaking too quickly.
Repetition mode can be enabled so that the
system repeats what you have said.
To change the speed or activate/deactivate
repetition mode:
1.
Settings
Press
in the top view.
2. Press
System
Voice Control
select settings.
Repeat Voice Command
•
Speech Rate
•
and
Advertisement
Chapters
Table of Contents
