Using a stored position for seat
and door mirrors
If the positions for the power* seat and the
door mirrors have been stored, they can be
activated by using the memory buttons.
Using a stored setting
A stored setting can be used with the front
door either open or closed:
Open front door
Depress one of the memory buttons 1 (
–
or 2 (
) with a short press. Power seat
and door mirrors move and then stop at
the positions stored in the selected mem-
ory button.
Closed front door
Hold one of the memory buttons 1 (
–
2 (
) depressed until seat and door mir-
rors stop in the positions that are stored in
the selected memory button.
If the memory button is released, the move-
ment of the seat and door mirrors will be stop-
ped.
WARNING
Because the driver's seat can be
•
adjusted with the ignition off, children
should never be left unattended in the
vehicle.
Movement of the seat can be STOP-
•
PED at any time by pressing any but-
ton on the power seat control panel.
Do not adjust the seat while driving.
•
Make sure there is nothing under the
•
seats when they are being adjusted.
)
Related information
Manual front seat (p. 172)
•
Power* front seat (p. 173)
•
Adjusting the power* front seat (p. 173)
•
Storing a position for seat and door mir-
•
rors (p. 174)
Adjusting* the length of the seat cushion
•
in the front seat (p. 176)
SEATS AND STEERING WHEEL
Adjusting the lumbar support* in the front
•
seat (p. 176)
) or
Angling adjustment of the door mirrors
•
(p. 159)
175
* Option/accessory.