Table of Contents
Advertisement
6.0 Installation and Use
6.3 Installing Booster seat
PROTECT 2-in-1 Folding Booster Seat Fit Guide
1. Open the Booster Seat from its folded position
(Fig. 17a):
- Grasp seat back and seat bottom and pull to
unfold Booster Seat.
- Continue to move seat back until it reaches
the upright use position (Fig. 17b).
2. Place Booster Seat in vehicle seating location
selected.
- Seating location MUST have a lap and
shoulder belt (Fig. 17b).
- If vehicle seat back is adjustable, adjust
back into the upright position.
- Adjust vehicle head rest to lowest position.
17
Fig. 17a
Fig. 17b
Copyright © 2021, Baby Trend, Inc.
6.4 Securing Child in Booster Seat
1. Secure child in booster seat.
- Child MUST sit upright with back contacting
seat back, NOT slouching or sliding down
(Fig. 18a).
2. Adjust headrest so that the top of shoulder belt
guides are at or just above child's shoulders
(Fig. 18b).
- Push headrest release handles in and move
headrest up or down to desired position
(Fig. 18c).
- Release headrest handles and make sure
handles are locked into position.
3. Adjust shoulder belt so that the inside edge of
the shoulder belt is centered on shoulder (Fig.
18b).
- Push release button to adjust belt guide
after shoulder (Fig 18d).
Note: If needed, the headrest can be re-
adjusted up or down to ensure the seat
belt is centered on child's the shoulder.
Copyright © 2021, Baby Trend, Inc.
6.0 Installation and Use
Fig. 18a
Fig. 18b
Fig. 18c
Release Button
Fig. 18d
Belt is
level with
top of
shoulder
1 2 3
18
Advertisement
Table of Contents
