Table of Contents
Advertisement
Chapter 3: Using the TV's Menu System
SOUND
Go Back
Tone Control
< > ...
Balance
Sound Type
SAP
Auto Vol Level
DBB
Audio Output
Int. Speakers
SOUND menu for analog signals.
SOUND
Go Back
Tone Control
< > ...
Balance
Sound Type
Auto Vol Level
DBB
Audio Output
Int. Speakers
Def. Language
Cur. Language
SOUND menu for digital signals.
28
Sound Menu
To access the Sound menu, press MENU on the remote and select SOUND from
the MAIN MENU. Depending on the kind of signal you're watching, the Sound
-----|--------
STEREO...
Menu will have different items available for you to adjust.
If you are watching analog programming or any video inputs, you'll see a
screen similar to the example SOUND menu to the left.
If you're watching digital programming, you'll see the second menu to the
Fixed...
left. The ANTENNA button on the remote toggles between analog and digital
menus.
Tone Control Allows you to choose your desired sound mode and adjust
the equalizer sliders.
Preset Press the left or right arrow button to select your desired
sound mode: Personal, Standard, Music, Speech and Theatre. When
you change any equalizer slider, the Preset changes to Personal.
Freq. range (Frequency range) Press the left or right arrow to
-----|--------
highlight the range you want to adjust 100Hz, 300Hz, 1KHz, 3KHz or
STEREO...
8KHz. Press the left or right arrow button to make adjustments.
Balance Press the right arrow button to increase the audio output in the
Fixed...
right speaker; press the left arrow button to increase the audio output in the
left speaker.
Spanish...
English...
Sound Type Press the right arrow button to scroll through the available
audio types which control the way the sound comes through your speakers:
MONO Plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
STEREO Splits the incoming stereo audio signal into left and right
channels.
Enhanced (only available for analog signals) Makes the sound
simulate surround sound.
Note: Most TV programs and recorded materials have stereo audio.
The word STEREO appears on the channel banner when you tune to a
program that is broadcast in stereo.
SAP (Second Audio Program) (only available for analog
broadcasts) Plays the program's audio in a second language, if one is
ANTENNA
available. The TV displays the word SAP in the channel banner when you
button
tune to a program that is broadcast with SAP information. SAP audio is
broadcast in mono. SAP is also used to broadcast a program's audio with
descriptions of the video for the visually impaired. Press the right arrow
button to turn SAP on or off.
Graphics contained within this publication are for representation only.
Advertisement
Table of Contents
