Timer Recording - RCA 20F502TDV User Manual

Timer recording can be
programmed on-screen with the
remote control. The built-in timer
allows automatic unattended
recording of up to 8 programs
within 1 month.
NOTES:
If the T.REC indicator blinks when the
•
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER REC to cancel the timer
program or press EJECT to remove
the cassette tape.
During timer recording standby mode,
•
the VCR operation cannot be used. To
use the VCR operation, press TIMER
REC to deactivate the timer. After you
use the VCR, press TIMER REC again
to put the VCR into timer recording
standby mode.
If you press TIMER REC during timer
•
recording, the recording operation will
be interrupted. If you press TIMER
REC again within the programmed time,
the recording operation will start again.
After a power failure or disconnection of
•
the power plug, all programmed record-
ing settings and time display will be lost
upon resumption of power. In this case,
reset the clock (see pages 16-18) and
reprogram any timer recordings.
Preparation:
Press TV/VCR to select the TV/VCR mode.
•
• Load a cassette tape with the erase prevention tab intact.
• Press DISPLAY/CALL to verify that the time and date are
correct (see page 39).
Example: Program a timer recording for the 23rd day, channel 125
(CABLE), 7:00 - 9:30 PM on timer program number 1 (Tape speed: SLP).
1
Press TV MENU in the TV/VCR mode.
Press or to select
2
Press or to select "TIMER REC
SET", then press
3
Press or to select one of the
program line, then press ENTER.
4
Press or to select the date, then
press .
5
Set the start time, end time, channel
and tape speed as in step 4, then
press ENTER.
NOTES:
•
Press to move arrow backward for
correction.
• To record from external source set the
channel to "L1" or "L2". "L1" or "L2" will
appear next to CH 125 (or 69).
6
To enter other programs, repeat steps
3-5.
• To return to the normal screen, press TV MENU 3 times.
7
Press TIMER REC. The T.REC indicator will light and the
VCR stands by for recording.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the T.REC indicator does not light in spite of the pressing of
TIMER REC, the cassette may not have been loaded yet (see
page 34).
• If the cassette is ejected in spite of the pressing of TIMER REC,
the erase prevention tab of the cassette may have been
removed (see page 34).

Timer recording

option.
TIMER REC SET
AUTO REPEAT
.
TIMER REC SET
AUTO REPEAT
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
2 3 T H
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð
ON
/ / / / MENU
CH
ON
/ / / MENU
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
/ ENTER/MENU
/
CH
TIMER REC SET
DATE 23(THU)
START 8:30AM
END Ð Ð : Ð Ð
CH 012
SPEED SP
/ / / / MENU
CH
TIMER REC SET
DATE 23(THU)
START 7 : 00PM
END 9 : 30PM
CH 125
SPEED
SLP
/ / / / ENTER/MENU
7 : 0 0PM 9 : 3 0PM 1 2 5
SLP
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
/ / ENTER/CANCEL/MENU
41