Table of Contents
Advertisement
TV operation
NOTE:
To listen through the headphones,
insert the headphones (not supplied)
with a 1/8" mini plug into PHONES
jack on the front. The sound from the
TV/VCR/DVD speaker is muted.
20
CHANNEL +/–
Press and release CH + or – . The
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 22 and 23
"Memorizing channels".
CALL
Press DISPLAY/CALL to display the
current informations on the screen.
Press DISPLAY/CALL again to clear
the call display.
• Channel number or VIDEO mode.
• Stereo or SAP (second audio
program) audio status.
• Audio output status.
QUICK VIEW
This button allows you to go back to
the last channel selected by press-
ing QUICK VIEW. Press QUICK
VIEW again to return to the last
channel you were watching.
MUTE
Press MUTE to switch off the sound.
The unit's sound will be silenced and
"MUTE" will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or the VOL + or –.
SLEEP
To set the TV/VCR/DVD to turn off
after a preset amount of time, press
SLEEP on the remote control. The
clock will count down 10 minutes for
each press of the SLEEP button
(120, 110, ...10, 0). After the sleep
time is programmed, the display will
appear briefly every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press SLEEP and
the remaining time will be displayed for a few seconds. To cancel
the sleep timer, press SLEEP repeatedly until the display turns to 0.
(continued)
TV/VCR
8 : 47
MON
CH 125
AM
STEREO SAP
00 : 00 : 00 SP
MUTE
SLEEP
120
Advertisement
Table of Contents
