Table of Contents
Advertisement
Dinion
XF
| Installation Manual
Enhance submenu
Function
Selection
AUTO
ON, OFF
BLACK
BLK LEVEL
-50, ... 0, ...+50
CONTOUR
-15 - 0 - +15
DNR
AUTO, OFF
XF-DYN
OFF, LOW, MID,
HIGH
EXIT
Back Light Compensation (BLC) submenu
Function
Selection
BLC
ON, OFF
BLC LVL
-15,..0,..+15
AREA
Select submenu
EXIT
Selecting an area
To set-up an area for BLC (or VMD), access the area menu by selecting the
AREA option from the BLC (or VMD) menu. Upon entering the AREA
menu, the current area is displayed with the upper left corner flashing. The
flashing corner of the image can be moved with the Up, Down, Left, Right
arrow keys. Pressing the Select key moves the flashing cursor to the
opposite corner, which can now be moved. Pressing Select again freezes
the area and exits the area menu.
Bosch Security Systems | 2003-10 | V0.5
Description
Autoblack ON automatically increases the
visibility of details
Adjusts the black level between 0 and approx
110mV. Zero position of slider corresponds to the
factory default black level
Adjusts the sharpness of the picture. 0
corresponds to the default position.
In AUTO mode the camera automatically reduces
the noise in picture. This may cause some motion
blur on moving objects.
In XF-DYN mode the camera automatically
optimizes the contrast in the picture.
Return to MODE menu
Description
When ON, the video level is optimized for the
selected area of the image. Parts outside this area
may be underexposed or overexposed (this is
normal).
BLC LEVEL adjust the balance between the
selected BLC area and its surrounding.
Select to access the Back Light Compensation
area menu (see selecting an area).
Return to MODE menu
EN | 20
Advertisement
Table of Contents
