Operating Audio Functions - RCA RCU800 User Manual

RCU800manual 3/8/00 2:03 PM

Operating Audio Functions

Note: Not all functions work for all brands. See page 14 for the Audio code list to operate your brand of
equipment.
TURNING ON THE RECEIVER OR MINI-SYSTEM
Point the remote control at the receiver and press the AUDIO button. The receiver should turn on.
In some cases, it may require pressing the AUDIO button and then the ON•OFF button to turn the
system on.
SELECTING A DEVICE INPUT
Device inputs such as CD Player or Tape Deck may be selected depending on the features of your
receiver or mini-system. Input selection may be made either by pressing the labeled digit button, or
by pressing the FUNCTION button to toggle through the inputs available on your system.
Note:
You may need to experiment with your system since
manufacturers products do not all work the same way.
USING THE NUMBER BUTTONS TO CHANGE AUDIO INPUTS
To select a device, press the number button (1-6) that corresponds
with the device you want to operate (CD, TAPE, TUNER, TV, VIDEO 1,
& VIDEO 2).
USING THE FUNCTION BUTTON TO CHANGE AUDIO DEVICES
To select a device, press the FUNCTION button until the input you
want to operate appears on your system.
OPERATING A CD PLAYER OR TAPE DECK
Use the Play, Forward, Reverse, Record, Stop, and Pause buttons
for CD players and tape decks. In some cases, the Preset buttons
(CH+/CH-) may work in changing tracks on CD players.
OPERATING THE AM/FM TUNER
1. Press the AUDIO button
2. Press the TUNER (3) button
3. Press the AM/FM button to toggle between AM and FM
4. Use the Preset (CH+/CH-) buttons to move up and down
channel presets.
OPERATING A HOME THEATER SURROUND SOUND SYSTEM
With RCA receivers, a second press of the TV button should turn the
receiver on.
1. Turn the TV on.
2. Press the AUDIO button.
3. Select the Audio input either by using the labeled number
buttons or the FUNCTION button
4. Press the VOL+ or VOL- buttons to control volume
Note: The Volume buttons may operate both TV and receiver volume
at the same time. If this presents a problem, it may be resolved by
disabling the TV speakers by going into the TV menu.
CONTROLLING THE SURROUND SOUND FEATURE
The Surround Sound feature may be turned ON/OFF by pressing the SURR ON•OFF button.
1. Press the SURR MODE button until the desired mode is found.
2. Press DELAY+ or DELAY- to achieve the desired delay effect.
3. Press the DSP ON•OFF button to turn DSP (Digital Signal Processor) ON or OFF.
4. Press the DSP button until the desired effect is achieved.
5. Press the TEST button to listen to speaker levels.
6. Press FRONT, CENTER, or REAR buttons to select speakers.
7. Press the LEVEL+ or LEVEL- buttons to adjust speaker levels.
15
Page 16