Related Manuals for RCA RCU900RF
Summary of Contents for RCA RCU900RF
- Page 1 Universal Learning Remote with TOUCHSCREEN User’s Guide Limited 90 Day Warranty RCU900RF...
-
Page 2: Table Of Contents
Master Reset ......... . .24 RCA All Power Off Feature ......24 Glossary of Terms . -
Page 3: Introduction
Smart Macro feature allows multiple commands to be executed with a single keypress. The RCU900RF is easy to use, easy to program, and it gives you total control—at the touch of your fingertips! -
Page 4: Product Diagram
LED Indicator Light The LED (Light Emitting Diode) indicator light, located at the upper right-hand side of the RCU900RF, lights up whenever a rubber key or any LCD touchscreen key is pressed. The LED indicator flashes and beeps three times (approximately two... -
Page 5: Setup Routine And Procedures
Setup Routine and Procedures The SETUP key is located towards the middle of the RCU900RF unit, on the right-hand side of the rubber keypad. The SETUP key is used to walk you through the steps in setting up the remote. To enter the Setup Mode, press and hold the SETUP key until the LED indicator light remains on. -
Page 6: Device Control Screens
Device Control Screens Your RCU900RF displays different control screens for each device. There are two screens needed to control each device. You can easily switch between these two screens by simply pressing the LCD SCREEN key at the top right of the touchscreen. -
Page 7: Code Entry
Code Entry In order for the RCU900RF to control your devices (TV, VCR, DVD, etc.), you must program it with the library code for each device. This enables the RCU900RF remote to control your device with the proper commands. If your TV, VCR, DVD, or satellite receiver is an RCA, ProScan or GE brand, the RCU900RF may not need any programming to control them. - Page 8 CLEAR key on the Main Setup Screen. 9. With the device on, aim the RCU900RF at the device and press the ON•OFF or the CH + key on the rubber keypad. If you have entered the correct number for your device, it will respond to the ON•OFF or CH +...
-
Page 9: Code Search
Code Search If the device you wish to control does not respond to any of the codes you have entered using the Library Code Entry, you can search the entire code library for a particular device that might not be listed in the Code List or might be listed under a different brand. -
Page 10: Code Autosearch
Main Setup Screen. The Code Search entry is now complete. Code Autosearch Your RCU900RF has the ability to automatically scroll through the entire code library by using the Autosearch feature. To start a Code Autosearch, follow these steps: 1. -
Page 11: Code Identification
DOWN keys) in both forward and reverse directions. 11. If your device responds to the command, and the RCU900RF sends the next code before you have a chance to press the LCD OK key, you can backtrack through the code library by pressing CH - or the DOWN ARROW. -
Page 12: Key Label Options
SAT/CBL CODE DVD CODE Key Label Options With the RCU900RF, you have the ability to customize individual keys and key label segments to meet your needs. It is recommended that the Key Label Options feature only be used after you have finished programming all your devices. This feature lets you select preset key options to be shown on the touchscreen. - Page 13 4. The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad for the device whose keys you want to customize (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress.
-
Page 14: Learned Key Reference Pages
Learned Key Reference Pages IMPORTANT NOTE: You cannot learn any commands under the LEARN, MACRO, SCREEN, SETUP or any Device key. Device: Device:... - Page 15 Device: Device:...
-
Page 16: Learn Commands
Your RCU900RF has the ability to learn and store commands from your original remotes under the mode of your choice. The RCU900RF can store up to 40 key commands for each original remote. Only one original remote can be stored under any one mode (i.e., the RCU900RF can learn the commands for one TV... -
Page 17: Learn Commands
All Learned keys are saved automatically. Remember, only one original remote can be stored under any one mode. The RCU900RF can learn the commands for one TV remote, one VCR remote, one DVD remote, etc. 1. Point the top of the original remote at... -
Page 18: Clear All Stored Learned Commands Under A Mode
4. The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad for the mode commands you want the RCU900RF to clear (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress. -
Page 19: Smart Macro Key Operations
4. All Learned command entries are now cleared for all device modes. Smart Macro Key Operations Your RCU900RF’s Smart Macro feature allows you to execute a sequence of commands with one keypress. A Smart Macro learns any sequence of original remote commands. A total of 20 learned commands can be stored under each of the nine available LCD MACRO keys. - Page 20 Press and hold the key on the original remote until the LED indicator light on the RCU900RF blinks off once. This process takes 2-3 seconds to complete. 9. The touchscreen now shows Macro Setup Screen 4. Release the original remote key.
-
Page 21: Delete A Smart Macro
Love to go to sleep with the TV on in the background? With the RCU900RF, you can program your TV to turn off after a period of time (from one to 99 minutes). The LCD SLEEP key is used to set the Sleep Timer and is only available in the main TV Mode. -
Page 22: Method 2 (From Setup Routine)
Sleep Timer by pressing the LCD CLEAR key. TV or CD/Audio Volume Punch-Through Your RCU900RF’s Punch-through command allows you to choose which device mode (either TV or AUDIO/AUX) controls the VOL + , VOL - , and MUTE keys on the rubber keypad. With this feature, your TV volume can work even when you are in VCR Mode, because it “punches through”... -
Page 23: Vcr Punch-Through
RECORD keypress. Additional Features Keypress Beep Feature Your RCU900RF beeps whenever a key is pressed to acknowledge the keypress. You can turn this feature on or off. The default setting is On. To turn the Keypress Beep on or off, follow these steps: 1. -
Page 24: Backlighting
If the Backlight illumination is on, and the LIGHT key is pressed again, the Backlight turns off. Master Reset A Master Reset returns all the RCU900RF defaults back to the original factory settings. The Master Reset clears all customer- programmed codes, Learned commands and Smart Macros, and resets all key labels. - Page 25 You can adjust the levels of the center, front and rear speakers by using the LEVEL /LEVEL keys. For RCA audio receivers, the OPTION key is used to command your audio receiver to generate a test tone in order to make speaker balance adjustments to maximize your audio system performance.
-
Page 26: Glossary Of Terms
Glossary (continued) INPUT The LCD INPUT key selects the video inputs of your device, if the device is equipped with this feature. The Liquid Crystal Display (LCD) acts as a “virtual keypad” on the remote. The touchscreen is normally blank when not in use. - Page 27 PUNCH-THROUGH A Punch-through command has the ability to punch-through from one device to another, (e.g., the TV volume can work while the remote is in the VCR Mode). SETUP KEY The SETUP key on the rubber keypad is used to walk you through the steps in setting up the remote.
-
Page 28: Troubleshooting
ENTER key to be pressed channels on your TV. after a channel is selected, press the LCD ENTER key on the RCU900RF to select the channel. The LCD OK key is not A) Try using the LCD MENU, responding. -
Page 29: Code List
Code List Televisions Abex ............. .185 Acme . - Page 30 ......... 053, 095, 133, 155, 170, 172, 194 RCA .....000, 003, 004, 005, 007, 009, 011, 048, 078, 082, 083, .
- Page 31 VCR/PVR Admiral ............001 Adventura .
- Page 32 Quasar ..........021, 060, 115, 125 RCA ......000, 003, 013, 021, 053, 055, 082, 083, 084, .
- Page 33 DSS RCA ........
- Page 34 Radioshack ....046, 094, 133, 146, 205, 206, 207, 215, 218, 219 RCA ... . .057, 112, 121, 135, 167, 206, 207, 210, 211, 212, 215, 218, 219 Realistic .
- Page 35 RCA ........043,...
-
Page 36: Helpline
Product Exchange Center 11721 Alameda Ave. Socorro, TX 79927 Trademark(s) ® Registered Marca(s) Registrada(s) www.rca.com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND...