Operating Audio System Functions - RCA RCU600M User Manual

6. Aim the remote at the AUDIO
component. Press the ON•OFF key. If
your AUDIO component turns off, you
have found the correct code. If your
AUDIO component does not turn off,
repeat steps 3-6 above, entering the next
code for your brand.
7. With your AUDIO component on, press
the VOL + (VOLUME UP) key. If the
AUDIO component responds, no
further programming is required.
8. Enter the code in the box provided on
this page for future reference.
9. If none of the codes work or your brand
is not listed, use one of the Code Search
methods to program this remote.
(See Code Search section on page 10).

Operating AUDIO System Functions

The following is a list of instructions for operating Audio functions. Not all
functions work for all brands. Experiment with your AUDIO system to
determine which functions work with your components. See the enclosed
AUDIO Code List to operate your brand of equipment.
TURNING ON THE RECEIVER
OR MINI-SYSTEM
Point the remote control at the receiver
and press the AUDIO key and then the
ON•OFF key to turn the system on.
SELECTING A
COMPONENT INPUT
Component inputs such as a DVD
player or VCR may be selected
depending on the features of your
receiver or mini-system. Input
selection may be made either by
pressing the labeled number key
or pressing the FUNCTION key to
toggle through the inputs available
on your system.
Note: You may need to experiment
with your system since manufacturers'
products do not all work in the
same manner.
USING THE NUMBER KEYS
TO CHANGE AUDIO INPUTS
To select a component, press the
number key (1-6) that corresponds
with the component you want to
operate (CD, TAPE, TUNER, TV,
VIDEO 1, or VIDEO 2).
USING THE FUNCTION KEY
TO CHANGE AUDIO INPUTS
To select a component, press the
FUNCTION key until the input
you want to operate appears on
your system.
OPERATING THE AM·FM TUNER
1. Press the AUDIO key and then the
ON•OFF key to turn the system on.
2. Press the TUNER (3) key.
3. Press the AM·FM key to toggle
between AM and FM.
4. Use the Preset (CH+/CH-) keys to
move up and down channel presets.
AUDIO SYSTEM CODE
OPERATING A HOME THEATER
SURROUND SOUND SYSTEM
1. Turn the TV on.
2. Press the AUDIO key and then the
ON•OFF key to turn the system on.
3. Select the AUDIO input either by
using the labeled number keys or
the FUNCTION key.
4. Press the VOL+ or VOL- keys to
control volume.
Note: The VOLUME keys may
operate both TV and receiver
volume at the same time. If
this presents a problem, it may be
resolved by entering the TV menu
and disabling the TV speakers.
CONTROLLING THE SURROUND
SOUND FEATURE
1. Press the DELAY+ or DELAY- key
to achieve the desired delay effect.
2. Press the DSP ON•OFF key
to turn DSP (Digital Signal
Processing) on or off.
3. Press the DSP MODE key until
the desired effect is achieved.
4. Press the TEST key to listen to
speaker levels.
5. Press FRONT, CENTER, or REAR
keys to select speakers.
6. Press the LEVEL+ or LEVEL-
keys to adjust the speaker levels.
ON•OFF
VOL +
9