Programming With Codes Search; Identifying Codes From Your Remote - RCA RCU510 User Manual

RCU510manual 7/19/01
Programming With Code Search
If your TV, VCR, DBS Satellite System, DVD, Cable Box or Audio System does not respond
after you have tried all the codes for your brand, or if your brand is not listed, try searching
for your code by following the steps below.
1. Manually turn on the device you wish to program.
2. Press and hold CODE SEARCH until the INDICATOR
LIGHT lights, then release CODE SEARCH.
3. Press and release the device button for the device you are
programming. The INDICATOR LIGHT will blink once,
then remain lit.
4. Press and release POWER until your device turns off.
Important: You may have to press
5. When your device turns off, press ENTER, the
INDICATOR LIGHT will turn off.
Identifying Codes From Your Universal Remote
If you need to find the three-digit code for your TV, VCR, DBS Satellite System, DVD, Cable
Box or Audio System after your device is set-up use this procedure.
1. Press and hold CODE SEARCH until the INDICATOR
LIGHT lights, then release CODE SEARCH.
2. Press and release the device button for the code you are
retrieving. The Indicator Light will blink once.
3. Press and release CODE SEARCH. The INDICATOR
LIGHT will turn off.
4. Starting with 0 on the keypad, press the number
buttons in order (0-9) until the INDICATOR LIGHT blinks.
5. The number which causes the indicator light to blink is
the first digit of your code.
6. Repeat step 4 until you have retrieved all three
numbers in the code.
15
10:27 AM Page 16
POWER
up to 200 times.
INDICATOR
LIGHT
(BLINK)
(OFF)
INDICATOR
LIGHT
(BLINK)
(OFF)
...