How to use OSD Menu
Use the
switch to select one from PRIVACY
1 through 12.
Select one from PRIVACY 1~12 and press the SETUP
switch to confi rm your setting. You can specify a pixel
that moves as you change the PIXEL LEVEL to set
the position.
PRIVACY ZONE SET1
PIXEL LEVEL
<POINT>
<POSITION>
- How to set the point
You can set each position of the 4 points.
1 If you press the SETUP switch in <POINT>,
you will see the points available in the PRIVACY
ZONE. Each time you press the SETUP switch,
the points available will move.
2 Use the
each point. Set each position of the four points
and press the SETUP switch to complete the
positioning.
34 – High Resolution Compact ATM Camera
[4]
switch to set the position of
- How to set the position
You can move the position of the overall area.
1 By pressing the SETUP switch in <POSITION>,
you can move the overall position of the privacy
zone.
2 Use the
and press the SETUP switch to confi rm it.
Note :
If more than one PRIVACY ZONE is specifi ed and the PRIVACY
–
SET is set to ON, the PIP function will be deactivated.
If the 12th PRIVACY ZONE is specifi ed, the LINE function of
–
FENCE will be deactivated.
switch to move the position