Samsung SCB-3021 User Manual page 31

- How to set the line
LINE
PIXEL LEVEL
<POINT>
DIRECTION
1 If you press the SETUP switch with the LINE
option set to ON, you can specify the position
and detection direction of the line.
2 If you change the PIXEL LEVEL for setting the
position, specify the pixel that moves by a single
pressure of the
3 In <POINT>, you can specify the fi rst position of
the line by pressing the SETUP switch once, and
the second position by pressing the switch again.
Use the switch to specify the position.
Set each position of the two points and press
the SETUP switch to complete the positioning.
4 If you change the DIRECTION, you can specify
the detection direction. The detection direction
based on the defi ned two points will be
displayed on the screen.
How to use OSD Menu
[4]
switch.
- How to set the area
AREA
PIXEL LEVEL
<SIZE>
<LOCATION>
1 If you press the SETUP switch with the AREA
option set to ON, you can specify the position
and size of the area.
2 If you change the PIXEL LEVEL for setting the
position, specify the pixel that moves by a single
pressure of the
3 In <SIZE>, press the SETUP switch and use the
switch to adjust the size.
Press the SETUP switch again to complete
the sizing.
4 In <LOCATION>, press the SETUP switch
and use the
position.
Press the SETUP switch again to complete the
positioning.
[4]
switch.
switch to specify the
31