Table of Contents
Advertisement
❖
CAMERA ID
CAMERA ID
ABCDEFGHIJKLMNOPQRSTUVWXYZ0
123456789 :?-+*()/
SP
SP LOCATION
CAMERA-1..................
...........................
The CAMERA ID menu is used for you to assign
a unique name to a camera. If you press the
SETUP switch with the CAMERA ID menu
selected, you will see the appropriate screen.
You can enter up to 54 alphanumeric or
special characters for the CAMERA ID. Select
LOCATION and press the SETUP switch to
move the display position of the CAMERA ID.
❖
VPS
If you set the VPS (Virtual Progressive Scan)
option, the camera will display the image in
progressive format.
Note :
For SCB-2020, the VPS option is not available.
–
How to use OSD Menu
[OFF, ON]
[OFF, ON]
❖
IRIS
The IRIS menu is used if you want to adjust the
intensity of radiation incoming to the camera.
•
ELC (Electronic Light Control)
① If you press the SETUP switch when the ELC
submenu is selected, the corresponding screen
appears. You can make the ELC (Electronic Light
Control) function active or not.
LEVEL allows you to adjust the overall brightness;
the closer to "+" the level is, the brighter it gets while
the closer to "-" the level is, the darker it gets.
ELC
LEVEL
[00]----I----
BACKLIGHT
②
If you set BACKLIGHT to BLC, you will see a menu
where you can specify the backlight compensation
area. Specify the backlight compensation area by
defi ning the area size and location.
If you use an ordinary camera to record a
backlighted scene, the object will be displayed
dark on the monitor. To solve this problem, use the
backlight compensation function. With this, you can
view a sharp video image even in a bright lighting.
[ELC]
OFF
23
Advertisement
Table of Contents
