Table of Contents
Advertisement
If you press the SETUP switch in item 1 or 2 of the
MASK menu, you will see a menu where you can
specify an area to mask.
MASK AREA
<SIZE>
<LOCATION>
You can specify Mask 1 and 2 simultaneously.
The mask is used only for determining the switch and
any excessive bright area at night will be masked.
Note :
–
If BACKLIGHT is set to BLC, the MASK AREA function will
be deactivated.
❖
WHITE BAL
If you want to adjust the color scheme, use the
WHITE BALANCE function.
•
DAY
In DAY mode, you can set the color values of RED
and BLUE. The screen will be displayed in colors
according to your settings.
How to use OSD Menu
[DAY/NIGHT]
WHITE BAL
DAY/NIGHT
MODE
RED
[00]----I----
BLUE
[00]----I----
R-GAIN
[0128]
B-GAIN
[0128]
Note :
You can set the values of R-GAIN and B-GAIN only in AWC mode.
–
•
NIGHT
Use the NIGHT mode if you want to set the white
balance differently according to the ambient luminance.
If the NIGHT mode is set to OFF, the white balance
will always operate as set in DAY mode; if not
to OFF, the camera will switch to as set in DAY/
NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED,
BLUE and BRIGHTNESS. The screen will be
displayed in colors according to your settings.
WHITE BAL
DAY/NIGHT
BRIGHTNESS
MODE
RED
[00]----I----
BLUE
[00]----I----
R-GAIN
[0128]
B-GAIN
[0128]
DAY
AWC
NIGHT
MID
AWC
27
Advertisement
Table of Contents
