ASSEMBLY INSTRUCTIONS
STEP 2
Attach the EXTENSION BASE(2) to the BASE FRAME(1) with HEX BOLT(M10x1.5x90mm)(27),
WASHERS(M10)(31), and NYLOCK NUT(M10x1.5)(33).
STEP 3
Refer to the inset drawing. Use a slight angle to insert the FOAM PAD POST(4) into the MAIN FRAME(3)
and secure with the ADJUSTMENT KNOB(15).
NOTE: The pin of the ADJUSTMENT KNOB(15) must be inserted into one of the adjustment holes in
the FOAM PAD POST(4) and the ADJUSTMENT KNOB(15) must be screwed in tight to ensure
that the FOAM PAD POST(4) will fit securely in the MAIN FRAME(3).
4
3
33
2
4
31
9
15
3
31
27