Page 1
ORIGINAL INSTRUCTIONS 18V Buffer/Polisher R18BP10...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.
Safety, performance, and dependability have been given increase the risk of electric shock. top priority in the design of your buffer/polisher. ■ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of INTENDED USE a cord suitable for outdoor use reduces the risk of electric shock.
Page 4
or storing power tools. Such preventive safety BUFFER/POLISHER SAFETY RULES measures reduce the risk of starting the power tool accidentally. WARNING ■ Store idle power tools out of the reach of The product is not intended for use by persons (including children and do not allow persons unfamiliar children) with reduced physical, sensory or mental with the power tool or these instructions to...
Following this rule will reduce the risk of electric shock. APPLYING POLISH TO THE APPLICATION BONNET Most polishes are either in paste or liquid form. Before using ■ For best results, your battery tool should be any polish, read all directions on appropriate applications charged in a location where the temperature is and proper use.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. ■ For greater safety and reliability, all repairs should be performed by an Authorised Ryobi Service Centre. CAUTION Indicates a potentially hazardous situation, which, if not APPLICATION AND BUFFING/POLISHING BONNETS avoided, may result in minor or moderate injury.