Performance Shift Indicator (Psi); If Equipped; Instrument Cluster Display Selectable Menu Items - Dodge CHARGER 2020 Owner's Manual

88 GETTING TO KNOW YOUR INSTRUMENT PANEL
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not
start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
P S I
ERFORMANCE HIFT NDICATOR
— I E
F QUIPPED
The Performance Shift Indicator (PSI) is enabled
on vehicles with manual transmission, or when
a vehicle with automatic transmission is in
manual shift mode. The PSI provides the driver
with a visual indication within the instrument
cluster display when the driver configured gear
shift point has been reached and the driver is
still accelerating. This indication notifies the
driver to change gear corresponding to the
configured RPMs in the head unit.
I C
NSTRUMENT LUSTER
S M
ELECTABLE ENU
Push and release the up
button until the desired Selectable Menu item is
displayed in the instrument cluster display.
Follow the Menu or submenu prompts as
desired.
Speedometer
Push and release the up
button until the speedometer menu is displayed
in the instrument cluster display. Push and
release the OK button to toggle units (km/h or
mph) of the speedometer.
(PSI)
Vehicle Info
Push and release the up
button until the "Vehicle Info" menu is displayed
in the instrument cluster display. Push and
release the right
scroll through the submenus items of "Vehicle
Info." Follow the directional prompts to access
D
ISPLAY
I
TEMS
or down arrow
or down arrow
or down arrow
or left arrow button to
or reset any of the following "Vehicle Info"
submenu items:
Tire Pressure

Coolant Temp

Trans Temp

Oil Temp

Oil Pressure

Oil Life

Battery Voltage

Storage Mode - Through this option, the

vehicle can be placed into Storage Mode.
AWD Status — If Equipped

Intake Air Temperature — If Equipped

Engine Torque — If Equipped

Engine Power — If Equipped

Air-Fuel Ratio — If Equipped

Boost Pressure — If Equipped

InterCooler (I/C) Temperature — If Equipped
