Table of Contents
Advertisement
Control Panel (Applicable to some models only)
Control Panel Features
Fridge Temperature
Indicates the set target temperature of the fridge
compartment in Celsius (°C).
The recommended Fridge set temperature in
normal ambient conditions and loads is 3°C ~ 4°C.
Freezer Temperature
Indicates the set target temperature of the freezer
compartment in Celsius (°C).
The recommended Freezer set temperature
in normal ambient conditions and loads is
-17°C ~ -19 °C.
NOTE
The displayed temperature is the target
temperature, and not the actual temperature
of the fridge. The actual fridge temperature
depends on the food inside the fridge as well as
ambient temperatures and how often the doors
are opened and closed.
Express Freeze
This function increases both ice making and
freezing capabilities.
When you touch the
Express Freeze button,
y
the graphic will illuminate in the display and
will continue for 3 hours. The function will
automatically disable itself after 3 hours.
You can stop this function manually by touching
y
the button one more time.
Pure N Fresh
When the Replace lamp is on, replace the Pure N
Fresh filter.
When the "Replace" lamp is turned on,
y
replace the filter to maintain the performance
of the Pure N Fresh Filter function.
To replace the filter, press the
y
on the touch control panel to the OFF mode
so that the filter icon is not illuminated and
the blue Pure N Fresh LED inside the fridge
remains off. The Pure N Fresh function has
three modes, The Pure N Fresh function
has three modes, Off(default mode when
icon is not lit up), Auto(when icon is lit up)
and Power(when icon and Power are lit up).
Power mode can be engaged by pressing the
Pure N Fresh touch control respectively.
Off>Auto>Power>Off>Auto....
Power mode will resume back to Auto mode
after 4 hours.
Control Lock
The Control Lock function disables the button
functions only on the display.
When power is initially connected to the fridge,
y
the Lock function is off.
If you want to activate the
y
other buttons, press and hold the Lock button
for 3 seconds or more. The Lock icon will
display and the Lock function is now enabled.
To disable the
Lock function, press and hold the
y
Lock button for approximately
3 seconds.
HOW TO USE
15
button
Lock function to lock
Advertisement
Table of Contents
