Table of Contents
Advertisement
Escape 1400 Insert Installation and Operation Manual
Appendix 2: Installing the Optional Fresh Air Intake Kit
(AC01298)
Note: Only remove the knock-out that will be connected to the fresh air intake kit.
To install a fresh air intake kit to the insert, the purchase of accessory AC01298 is
required.
46
Using pliers, remove the rectangular
knock-out plate (A) located on the left
or right side of the convection air
jacket. Choose the side that is best
for your installation.
Then, install the fresh air kit adapter
(B) using 4 screws. Secure the
flexible pipe (D) (not supplied) to the
adapter
(B)
using
adjustable pipe clamps (C). Secure
the other end of the pipe to the
outside wall termination (E) using the
second adjustable pipe clamp (C).
The outside wall termination (E) must
be installed outside of the building.
one
of
the
Advertisement
Table of Contents
