Table of Contents
Advertisement
Z-WAVE DEVICES
CLEAR DEVICE
Clears Z-Wave device from a network, whether it was enrolled with another controller previously
or the IQ4 Hub. Also deletes a device from the IQ4 Hub if currently paired.
Touch
"Clear Device"
NOTE: Each Z-Wave device is different, and not all devices have a hard button to pair or
learn. Refer to your device' s installation manual for specifics on pairing or learning.
Panel will start sending a
"Clear" signal
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
98
OF
Panel returns to
Z-Wave Device
Press
"Pair" or "Learn"
button on device*
197
menu when
complete
Advertisement
Table of Contents
