42- Security And Arming - QOLSYS IQ4 Hub Installation Manual

PROGRAMMING
SECURITY AND ARMING
Security and Arming
Change arming settings, entry and exit delays, enable Duress Authentication
and more.
Setting Default
Dealer Code*
Installer Code
Swinger Shutdown Enabled
Swinger Shutdown
Count
Panel Tamper Enabled
2222 Code to access all options
1111 Code to access installer options only
Determines whether the panel allows the same sensor to trip the
alarm more than once during the same arming period. When Enabled,
the sensor will trip according the to the Swinger Shutdown Count
setting. When Disabled, a sensor may trip up to 128 times per arming
period.
Determines the number of times the same sensor is allowed to trip the
alarm during the same arming period (1-6). Swinger Shutdown must
1
be enabled in order for this setting to work.
to 3
This setting enables or disables the Panel Tamper switch on the back of
the panel.
NOTE: for UL/cUL and EN Grade 2 this setting shall be Enabled
QOLSYS CONFIDENTIAL AND PROPRIETARY
Description
NOTE: For EN Grade 2 it shall be set
PAGE 42 OF 197
FIND IT
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
INSTALLATION
SECURITY AND
ARMING
* Additional options available
only through the Dealer Code.