Electrical - Scotsman NH2030 Installation And User Manual

NH2030, NS2030, FS2330
A Series Water and Remote User Manual

Electrical

The machine does not include a power cord, one
must be field supplied or the machine hard wired to
the electrical power supply.
The junction box for the power cord is on the back
panel. See below.
Refer to the dataplate on the machine for minimum
circuit ampacity and determine the proper wire size
for the application. The dataplate (on the back of the
cabinet) also includes the maximum fuse size.
Model Series
NS2030W-32 A
NH2030W-32 A
FS2330W-32 A
NS2030W-3 A
NH2030W-3 A
FS2330W-3 A
NS2030R-32 A
NH2030R-32 A
FS2330R-32 A
NS2030R-3 A
NH2030R-3 A
FS2330R-3 A
Water Cooled Electrical
Junction
Box
Cover
Power
Black
Supply
White
Wires
Ground
Dimensions Voltage
w" x d" x h" Volts/Hz/Phase
30 x 24 x 29 208-230/60/1
30 x 24 x 29 208-230/60/1
30 x 24 x 29 208-230/60/1
30 x 24 x 29 208-230/60/3
30 x 24 x 29 208-230/60/3
30 x 24 x 29 208-230/60/3
30 x 24 x 29 208-230/60/1
30 x 24 x 29 208-230/60/1
30 x 24 x 29 208-230/60/1
30 x 24 x 29 208-230/60/3
30 x 24 x 29 208-230/60/3
30 x 24 x 29 208-230/60/3
Ground Wire
Connection
Install
Strain
Relief
November 2020
Connect electrical power to wires inside the junction
box in the back of the cabinet. Use a strain relief and
connect a ground wire to the ground screw.
Remote models power the condenser fan motor from
marked leads in the junction box.
Do not use an extension cord. Follow all local and
national codes.
Condenser Min Circuit
Type Ampacity
Water 22.2
Water 22.2
Water 22.2
Water 13.2
Water 13.2
Water 13.2
Remote 25.2
Remote 25.2
Remote 25.2
Remote 15.2
Remote 15.2
Remote 15.2
Remote Electrical
Junction
Power
Black
Supply
White
Wires
Ground
Blue
Condenser
Fan Motor
Page 7
Max Fuse Size or HACR
Type Circuit Breaker
30
30
30
15
15
15
30
30
30
20
20
20
Box
Ground Wire
Cover
Connection
Install
Strain
Relief