Tpm; Acpi Settings - Asus P9D-C Series Manual

USB transfer time-out [20 sec]
Allows you to select the USB transfer time-out value. Configuration options:
�1 sec� �5 sec� �10 sec� �20 sec�
Device reset time-out [20 sec]
Allows you to select the USB device reset time-out value. Configuration options:
�10 sec� �20 sec� �30 sec� �40 sec�
Device power-up delay [Auto]
This allows you to set the maximum time the device will take before it properly reports itself to
the Host Controller. Configuration options: [Auto] [Manual]
4.4.7

TPM

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Configuration
TPM Support
Current Status Information
NO Security Device Found
Security Device Support [Disabled]
Allows you to enable or disable BIOS support for security devices. Configuration options:
�Disabled� �Enabled�
4.4.8

ACPI Settings

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
ACPI Settings
Enable Hibernation
ACPI Sleep State
Enable Hibernation [Enabled]
Allows you to enable or disable the Hibernation feature (OS/S4 sleep state).
Configuration options: [Disabled] [Enabled]
ACPI Sleep State [Both S1 and S3 available for OS to choose from]
Allows you to set the ACPI Sleep state. Configuration options: [Suspend Disabled]
�S1 only (CPU Stop Clock)� �S3 only (Suspend to RAM)�
�Both S1 and S3 available for OS to choose from�
4-22
[Disable]
[Enabled]
[Both S1 and S3 avai...]
Enables or Disables BIOS
support for security
device.O.S. will not
show Security Device. TCG
EFI protocol and INT1A
interface will not be
available.
Enables or Disables
System ability to
Hibernate (OS/S4 Sleep
State). This option may
not be effective with
some OS.
Chapter 4: BIOS setup