Asus P9D-C Series Manual page 117

3. The utility immediately starts rebuilding after the disk is selected. The status of the
degraded RAID volume is changed to "Rebuild".
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
ID Name
1 Volume0
Physical Devices:
Port Drive Model
1 ST3160812AS
2 ST3160812AS
Volumes with "Rebuild" status will be rebuilt within the operating system.
[ ]-Select
4. Exit Intel Rapid Storage Technology and reboot the system.
Select Start > Programs > Intel Rapid Storage > Intel Rapid Storage Console or
5.
click the Intel Rapid Storage Technology tray icon to load the Intel Rapid Storage
Manager utility.
From the View menu, select Advanced Mode to display the details of the Intel Rapid
6.
Storage Console.
From the Volumes view option, select RAID volume to view the rebuilding status.
7.
When finished, the status is changed to "Normal".
Rebuilding the RAID with a new hard disk
If any of the SATA hard disk drives included in the RAID array failed, the system displays the
status of the RAID volume as "Degraded" during POST. You may replace the disk drive and
rebuild the RAID array.
To rebuild the RAID with a new hard disk:
1. Remove the failed SATA hard disk and install a new SATA hard disk of the same
specification into the same SATA Port.
Select a destination disk with the same size as the original hard disk.
Reboot the system then follow the steps in section Rebuilding the RAID with other
2.
non-RAID disk.
ASUS P9D-C Series
[ MAIN MENU
[ DISK/VOLUME
Level1 Strip
RAID1(Mirror) N/A
Serial #
9LS0F4HL
3LS0JYL8
[ESC]-Exit
All Rights Reserved.
]
3. Reset Disks to Non-RAID
4. Exit
INFORMATION]
*=Data is Encrypted
Size Status
149.0GB Rebuild
Size Type/Status(Vol ID)
149.0GB Member Disk(0)
149.0GB Member Disk(0)
[ENTER]-Select Menu
Bootable
Yes
5-11