Extension Wings - Delta 36-5100 T2 Instruction Manual

EXTENSION WINGS

For the 36-5000 T2 and 36-5100 T2.
Hardware Bag "C, D, G"
1.
Attach the left extension wing
using two 5/16-18 x 1-1/8 inch Flat Countersunk Hex
Screws and 5/16-18 Hex Flange Nuts
HP15
2.
Attach the left extension wing
two 5/16-18 x 7/8 Hex Screws w/ Split Lock Washers
and 5/16-18 Hex Flange Nuts
3.
Attach the left side extension wing
rear rails using four 5/16 18 x 1 1/8 inch Flat Countersunk
Hex Screw and 5/16 18 hex flange nuts
HP15
4.
Attach the left side extension wing
the saw table using three 5/16 18 x 7/8 inch hex head
screws with Split Lock Washers
5.
Lay the two remaining extension wings
down on the saw table. Place the two wings adjacent to
each other, so the holes patterns match. Fasten the two
wings together using three 5/16 18 x 7/8 inch hex head
screws with Split Lock Washers
nuts .
HP14
6.
Turn the two wings fastened together over and fasten
them to side of the saw table using three 5/16 18 x 7/8
inch hex head screws with Split Lock Washers
Figure 9.
7.
Secure the 2 joined Extension Wings
using four 5/16-18 x 1-1/8 inch Flat Countersunk Hex
Screws and 5/16-18 Hex Flange Nuts
HP15
8.
Secure the 2 joined Extension Wings
using four 5/16-18 x 7/8 Hex Screws w/ Split Lock Washers
and 5/16-18 Hex Flange Nuts
HP7
NOTE: Use a ruler to make sure the top edges of the wings are
flush with the top of the tabletop. See Figure 8.
NOTE: There are four 5/16-18 Set Screws
extension wing for the 36-5100 T2. Two Set Screws for each cast
iron Extension Wing. The set screws are used to adjust the level.
See Figure 9.
ASSEMBLY
[3] to the front rail
PC10
.
HP14
[3] to the rear rail using
PC10
HP7
.
HP14
[3] to the front and
PC10
.
HP14
[3] to the side of
PC10
. See Figure 10.
HP7
[3] upside
PC10
and 5/16 18 hex flange
HP7
. See
HP7
to the front rail
PC10
.
HP14
to the rear rail
PC10
.
HP14
for the cast iron
HP24
PC10
3
LEFT EXTENSION LEFT EXTENSION
WING WING
HP7
19
3
RULER RULER
RIGHT EXTENSION RIGHT EXTENSION
WING WING
Figure 8
HP7
HP14
HP24
Figure 9
PC10
HP15