Table of Contents
Advertisement
Still Image Recording
•
Preparation:
Open the LCD monitor to turn on the camcorder.
•
Insert an SD card.
#
Select
(still image) mode.
To view the last recorded image
A
Select
after shooting.
Selecting $ during playback deletes that
image.
To change the image quality
Change the settings in [IMAGE QUALITY]
from the MENU.
NOTE
•
DIS (Digital Image Stabilizer) does not function during still image recording.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
automatically to conserve power. To turn on the camcorder again when using the battery pack,
close the LCD monitor and open it again. When using the AC adapter, perform any operation
such as zooming.
Press PLAY/REC to select the recording
mode.
PLAY/REC
Press and hold SNAPSHOT halfway.
The ? indicator becomes green when the
captured image is focused.
Press SNAPSHOT fully to take the picture.
To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE] from the MENU.
To change the aspect ratio of the image
Change the settings in [IMAGE SIZE] from
the MENU.
To turn on the face detection mode
See page 25.
FINE
FINE [9999]
PHOTO
23
Advertisement
Table of Contents
