Table of Contents
Advertisement
Parameter
Interval
Sensor Level
18
Settings
(Bold=default)
10S (second)
default, with a
60M (minute)
to1S (second)
range of settings
available.
(60M-1M are set
in one minute
increments,
59S-1S are set
in one second
increments)
Low, Normal,
High, Auto
Description
Selects the length of time that the
camera will "wait" until it responds to any
additional triggers from the PIR after an
animal is first detected and remains within
the sensor's range. During this user set
"ignore triggers" interval, the camera will
not capture photos/videos. This prevents
the card from filling up with too many
redundant images. Settings begin with
10 second default when parameter is first
selected. Note: after setting down past "1S",
settings start over at "60M".
Selects the sensitivity of the PIR sensor.
The "High" setting will make the camera
more sensitive to infrared (heat) and more
easily triggered by motion, and the "Low"
setting makes it less sensitive to heat and
motion. The High setting can be useful
when the ambient temperature is warm
(making it more difficult for the sensor
to detect animals), and the Low setting
may help in cold weather if the camera
is being triggered too often by anything
warmer than the surroundings. "Normal"
is for average or moderate conditions. The
default "Auto" setting will allow the camera
to determine the best setting based on its
current operating temperature. This is an
ideal setting if the weather is expected to
change significantly during the period the
camera will be used.
Advertisement
Table of Contents
