Table of Contents
Advertisement
Parameter
Field Scan
Video Sound
(only affects
video clips)
Default Set
20
Settings
(Bold=default)
On, Off
(After On is
selected): "A"
Start/Stop, "B"
Start/Stop,
Interval
On, Off
Cancel,
Execute
Description
Turns Field Scan (Time Lapse) record-
ing mode on/off. When activated, Field
Scan forces the camera to take photos
or videos even when it is not triggered by
a nearby live animal, useful for constant
monitoring of an area that might be far
away from the camera. The user can set
the start and stop times for up to two in-
dependent "blocks" of Field Scan record-
ing, as well as the interval time between
each photo/video. To ensure correct
operation, avoid setting overlapping start/
stop times for Field Scan A and B. Please
read the "Field Scan 2x..." section of this
manual for details on using this feature.
Select "On" to record audio along with
the video when the camera is set to video
mode (saved file sizes will be slightly
larger).
Select "Execute" and press OK to
restore all parameters to the original
factory default settings. If the camera is
behaving oddly and you think you may
have changed the setting for something
accidently (but aren't sure which one),
this will reset all parameters to their most
commonly used or "generic" settings.
Advertisement
Table of Contents
