Table of Contents
Advertisement
Programming domestic water heating
Operation manual
15
Programming domestic water heating is carried out as follows:
INFORMATION
Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the
button.
1
Press the
button to enter the programming/consulting mode.
2
Select the operation mode you would like to program by means
of the
and
The actual mode is blinking.
3
Press the
button to confirm the selected mode.
4
Select the day you would like to program by means of the
and
buttons.
The actual day is blinking.
5
Press the
button to confirm the selected day.
6
Hold down the
button for 5 seconds to the program the
detailed actions.
The first programmed action of the selected day appears.
7
Use the
button to select the action number you would like to
program or to modify.
8
Use the
and
9
Use the
button to select or deselect
10 Repeat steps
7
to
9
to program the other actions of the selected
mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
11 Press the
button for 5 seconds to store the programmed
actions.
If the
button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 is deleted.
By pressing the
button several times, you return to previous
steps in this procedure and finally return to normal operation.
12 You automatically return to step 5, start again to program the
following day.
buttons.
buttons to set the correct action time.
as action.
HXHD125AV1B + HXHD200AY1B
VRV IV system indoor unit
4P513553-1 – 2017.11
Advertisement
Table of Contents
