Table of Contents
Advertisement
2.5 Expansion Slots (PCI Express Slots)
There are 2 PCI Express slots on this motherboard.
PCIE slot:
PCIE1 and PCIE2 (PCIE 4.0 x16 slot, from CPU) are used for PCI Express x24 lane width
cards.
Slot
PCIE1
PCIE2
Installing an expansion card
Step 1.
Before installing an expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use on the chassis.
Keep the screw for later use.
Step 4.
Install the PCIE card to the riser card.
Step 5.
Align the riser-card assembly connector with the slot on the system board.
Press firmly until the riser-card assembly is completely seated on the slot.
Step 6.
Fasten the card to the chassis with the screw.
Step 7.
Replace the system cover.
20
Generation
Mechanical
4.0
x24
4.0
x24
Electrical
Source
x24
x24
CPU1
CPU1
Advertisement
Table of Contents
