Table of Contents
Advertisement
BIOS Features
Hardware Monitor
Temperature
Fan
Voltage
Support OS
OS
Environment
Temperature
This motherboard supports Wake from on Board LAN. To use this function, please make
sure that the "Wake on Magic Packet from power off state" is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the "PCI Devices Power On" is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. After that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certification tests. If you install the drivers only, it
will pass the WHQL tests.
4
- Plug and Play (PnP)
- ACPI 2.0 Compliance Wake Up Events
- SMBIOS 2.8 Support
- ASRock Rack Instant Flash
- CPU Temperature Sensing
- MB/Card side Temperature Sensing
- Fan Tachometer
- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
- Fan Multi-Speed Control
Voltage Monitoring: +12V, +5V, +3.3V, VDDCR_CPU,
VDDCR_SOC, VCCM_ABCD, VCCM_EFGH, +BAT, 3VSB,
5VSB, +12V_EDGE, +3V_EDGE
Microsoft® Windows®
- Server 2016 (64 bit)
- Server 2019 (64 bit)
Linux®
- RedHat Enterprise Linux Server 8.2 (64 bit) / 7.9 (64 bit)
- CentOs 8.2 (64 bit) / 7.9 (64 bit)
- SUSE SLES 15.2 (64 bit) / 12.5 (64 bit)
- UBuntu 20.04.1 (64 bit) / 18.04.5 (64 bit) / 16.04.7 (64 bit)
Hypervisor
- VMWare® ESXi 7.0 u1c / vSphere 7.0 u1c
- VMWare® ESXi 6.7.0 u3 / vSphere 6.7.0 u3
- VMWare® ESXi 6.5.0 u3 / vSphere 6.5.0 u3
- CITRIX Hypervisor 8.1.0
*Please refer to our website for the latest OS support list.
Operation temperature: 10°C ~ 35°C / Non operation
temperature: -40°C ~ 70°C
Advertisement
Table of Contents
