Threading The Left Needle - Singer S0700 Instruction Manual

Threading the Left Needle

Turn off the main power switch and unplug the machine.
Note: Raise the presser foot lifter for easier threading.
Set the Threading/Sewing switch to "Threading" posi-
tion by turning it to the right.
Turn the handwheel slowly toward you until the mark
on the wheel matches the mark on the cover. The hand
wheel will click and is locked in threading position.
Place a thread spool on the left spool pin. Pull the
thread through the left thread guide from back to front
(A).
Note: If the thread tends to slip away from the guide
while sewing, pass the thread through both thread
guide holes as shown (B).
Slide the thread under the top cover thread guide (C)
as illustrated.
Pull the thread along the threading slit. Using both
hands, insert the thread between the tension disks (D).
22 – GETTING READY TO SEW
A
B
C
D
F
E
G
H
I
A
C
B
D