Table of Contents
Advertisement
* Display design may differ from those
illustrated.
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
0°
-5°
2.4 MultiClient Integrated KVM
What is it?
1
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
90°
How to enable MultiClient Integrated
2
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the
OSD menu setting.
Use USB C and HDMI or DP as input, then
use USB C/ USB B as USB upstream
Please follow the steps for the settings.
1. Connect the USB upstream cables
from your dual devices to the"USB C"
and "USB up" port of this monitor at
the same time.
2. Connect peripherals to the USB
downstream port of this
1
3. Enter to OSD menu. Go to KVM
layer and select "Auto", "USB C"
or "USB up" to switch the control
of peripherals from one device to
another. Simply repeat this step for
switching the control system using
one set of peripheral.
11
Source
USB Upstream
HDMI/DP
USB C
PC1/PC2
USB UP
PC1
2
USB USB
USB UP
USB C
monitor.
USB C
1
PC2
Advertisement
Table of Contents
