Table of Contents
Advertisement
4
Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on the connectors.
Install the included LED
bulbs into the socket. When
necessary, replace with bulb
of same wattage.
Hunter Pro Tip:
Want to install your fan without a light kit?
Go to
www.HunterFan.com/FAQs
fan without the light kit?"
Ceiling Bracket
Downrod
5
Partially install two of the light kit screws
found in the
hardware bag. Align the
notches in the sides of the lower switch
housing with the screws on the upper
switch housing. Twist the lower switch
housing clockwise to lock into place.
Installing the Bulbs and Glass
Note:
and click "How do I install my
Hanging Fan
Wiring
Assembling the Light
2 of 3
Light Kit Screw
bag
Fan style may vary.
Canopy
6
bag
Install the last light kit screw.
Tighten all three screws securely.
WARNING
FAN FALL HAZARD
Make sure all three screws are tight to secure the
lower switch housing to the upper switch housing
Loosen the thumbscrews.
Insert the globe into the
fixture and retighten the
thumbscrews securely. Do
not overtighten.
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
Blades
Light
1886
1 of 3
Light Kit Screw
ON
8
Glass/Bulbs
Advertisement
Table of Contents
