Hunter Churchwell Installation Manual page 8

1886
Secure each blade to a blade iron as shown using the blade nuts, found in the
bag, and the blade assembly screws and grommets, found in the
Repeat x5
7
Ceiling Bracket Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware
hardware bag.
Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
Hunter Pro Tip:
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
x15
Blade Screw
bag
x15
Grommet
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Lightly attach the blade arms to the
motor with the blade arm screws,
then securely tighten after both
screws are attached.
Canopy Blades
x2
Canopy Screw
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
x15
Blade Nut
bag
IMPORTANT
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
x10
Blade Arm Screw
Repeat x5
Note:
Fan style may vary.
Light Glass/Bulbs