Installing The Canopy; Installing The Blades - Hunter Melbourne Installation Manual

1886
Note:
Fan style may vary.
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

Attach each blade to a blade iron using the blade
washer, found in the
assembly screws, found in the
Repeat x3
Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
hardware bag, and the blade
hardware bag.
Canopy Blades
x2
Canopy Screw
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
x6
Blade Screw
bag
x3
Blade Washer
bag
Light Remote Troubleshooting