Table of Contents
Advertisement
1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x4
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag into the
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
Note:
NOTE: Follow the instructions on the blade. Installing it
Fan style may vary.
incorrectly could result in your fan not functioning.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Note:
Fan style may vary.
Canopy
Blades
x2
Canopy Screw
bag
x12
Blade Screw
bag
Grommet
bag
IMPORTANT
Remember the screws that you
kept after removing the shipping
ring? You need them here.
x4
Blade Arm Screw
bag
Repeat x4
Light
Remote
Troubleshooting
x12
Advertisement
Table of Contents
