Advertisement
1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x5
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag into the
Hanging Fan
Insert the two canopy screws
found in the
Hunter Pro Tip:
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
IMPORTANT
NOTE: Follow the instructions on the blade. Installing
it incorrectly could result in your fan not functioning.
Remove instructional label after installation.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Wiring
Canopy
hardware bag.
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
bag
bag
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
Repeat x5
Blades
Light
Glass/Bulbs
x2
Canopy
Screw
x15
Blade Screw
x15
Grommet
Note:
Fan style may vary.
x10
Blade Arm Screw
Note:
Fan style may vary.
Remote
Advertisement
