Fisher & Paykel DishDrawer DD60D2NX9 User Manual page 34

For ease of access to the drain filter and filter plate, the base rack can be removed by lifting
it from the rear. Alternatively, remove the cutlery tray, lift the trap door and remove the
fixed tine rack. Refer to 'Racking features' for details.
Removing and cleaning the drain filter
1
holder
2
mesh
Replacing the drain filter
1
2
34
MAINTENANCE
Twist the drain filter counter-clockwise and
lift to remove.
Separate the holder and the mesh by
pinching one side of the mesh and pulling.
Do not attempt to remove the mesh
by pinching both sides as this may
cause damage.
Clean under hot soapy water and
rinse thoroughly.
Click the drain filter mesh back onto the
holder and twist until the arrows on the
mesh and holder align.
Push the drain filter back into the tub and
rotate clockwise until the arrows on the
filter and base of the drawer align.