Installing The Canopy; Installing The Blades - Hunter Tailwind 51289 Instruction Manual

1886
Put the blade washers, found in the
blade screws, found in the
blade screws to secure each blade to a blade iron.
Repeat x6
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades

hardware bag, onto the
hardware bag. Then install the
Hanging Fan Wiring
Insert the two canopy screws
found in the
Lightly attach the blade arms to the motor with screws
found in the hardware bag, then securely tighten
after both screws are attached.
Ridge
Canopy Blades
hardware bag.
BAG
BAG
Note:
Fan style may vary.
BAG
Repeat x6
BAG
Light Glass/Bulbs
x2
Canopy Screw
x18
Blade Screw
x18
Washer
x12
Blade Arm Screw
Note:
Fan style may vary.
Remote