Q-See QS4088035 User Manual page 21

STEP 5. When you select Play, a Playback Control Bar will appear.
1 2
5 6 7 8 9 10
PICTURE 4-24
# Function
1 Hour Blocks
3 Progress Bar
5 Play
7 Pause
9 Previous Frame / Next Frame
11 Next Hour
13 Reduce window
15 Add window
17 Cut
19 Convert AVI
21 Mute
Click the button on the bottom of the multimedia player and then click the Play button
(Item number 5 in Picture 4-24) to start playing the file.
The Playback Control Bar shows the date the file was recorded. The Hour Blocks indicate
(in 24 hour format) at what hour the event took place. The green area in the Progress Bar
shows when in that hour the event occurred as well as how far the player is in the video
recording.
The example displayed in Picture 4-24 above, shows that the event being played was
recorded on April 2, 2009 from 4:57pm (16:57) to 5pm. Clicking on the Next Hour button
(Item number 11 in Picture 4-24) would take the user to the rest of the event beginning
at 5:00.00.
40
3 4
11 12 13 14 15 16 17 18 19 20 21
# Function
2 Minute
4 Date
6 Previous Recording File
8 Stop
10 Slow Play, Normal Play, Fast Play
12 Snapshot
14 Play All Channels
16 Start
18 Delete
20 On-Screen Display
22 Volume
Video Play Settings
Each video record contains data from all the cameras that were recording at that time. You can
view up to four of those recordings at one time by clicking on the "Play All Channels" button
(Item number 14 in
in the Playback software by following these steps:
STEP 1. In the Setting menu in the
Playback software toolbar, select
22
Video Play Setting
STEP 2. From that pull-down menu,
choose Normal Video Bar.
STEP 3. In the resulting pop-up window,
choose which channel you wish to
view.
STEP 4. Check the box
the Video". Click Apply then OK.
Audio Settings
If you have connected an audio-capable camera or a microphone to Channels 1 or 2, you can
play back recorded audio along with the video.
STEP 1. In the Setting menu in the
Playback software toolbar, select
Audio Channel Setting.
STEP 2. From that pull-down menu,
choose Normal Video Bar.
STEP 3. In the resulting pop-up window,
choose which channel you wish to
enable audio for.
STEP 4. Check the box
channel has sound data". Click Apply
then OK.
4-24). Or, you can choose which channel will be played back
Picture
PICTURE 4-25
next to "Play
PICTURE 4-26
PICTURE 4-27
next to "The
PICTURE 4-28
41