AUTO DRY COOL HEAT
FAN Operation
■
Operating conditions
■
Recommended temperature setting
• For cooling: 26-28°C
• For heating: 20-24°C
■
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) ef
•
Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
■
Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
• Use the air conditioner in the following conditions.
MODE
O
u
d t
o
r o
e t
Indoor temperature
COOL
Indoor humidity
O
u
d t
o
r o
e t
HEAT
Indoor temperature
O
u
d t
o
r o
e t
Indoor temperature
DRY
Indoor humidity
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
11
■
To change the temperature setting
Press
• The displayed items on the LCD will change whenever either one of the buttons is
pressed.
COOL operation
18-32°C
Press
to raise the temperature and press
temperature 1°C each press.
Operating conditions
m
p
e
a r
u t
e r
:
10-46°C
: 18-32°C
: 80% max.
m
p
e
a r
u t
e r
:
2-20°C
: 10-30°C
m
p
e
a r
u t
e r
:
10-46°C
: 18-32°C
: 80% max.
.
HEAT operation
AUTO operation
10-30°C
18-30°C
to lower the
fect.
If operation is continued out of this range
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
• A safety device may work to stop the operation.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
DRY or FAN operation
The temperature setting is
not available.