Table of Contents
Advertisement
Storing using reverse gear
:
Memory button M
Button for the exterior mirror setting
;
Button for the front-passenger side exterior
=
mirror
?
Button for the driver's side exterior mirror
Start the engine.
X
Press button =.
X
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use button ; to adjust the exterior mirror to
X
a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Saving using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged.
Turn the SmartKey to position 2 in the igni-
X
tion lock (
page 123).
Y
Press button =.
X
Use button ; to adjust the exterior mirror to
X
a position that allows you to see the rear
wheel and the curb.
Press memory button M : and one of the
X
arrows on button ; within three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
After successfully storing, reset the driving
X
position of the exterior mirror.
Memory function
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the igni-
X
tion lock (
page 123).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disengaged
R
reverse gear
when you use button ? to select the exterior
R
mirror on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
105
Z
Advertisement
Table of Contents
